Get a price quote now! Contact the experts in Playground Safety Surfaces today!
Call us at 800.342.2721 or send us your request
It's not just the right thing...it's the law!
Ensure compliance with
ADA FibarMat wear mats.
Now on sale–$99 each!
ADA FibarMat wear mats must be installed under all swings, tire swings, slide exits, and all other wear areas, including sliding poles
to ensure compliance with the Federal Accessibility Law of
March 15, 2012.
Accessibility and Extra Protection
ADA FibarMat Wear Mats prevent holes under swings, at slide exits and other high use areas—vital for ADA compliance.
Unlike other wear mats, ADA FibarMats have beveled edges for greater accessibility. And they pay for themselves by greatly reducing the need for raking in heavy use areas.
Three Ways to Order:
- Shop online
- Call your exclusive Fibar Representative.
- Or you can call us directly at 1-800-342-2721 or 914-273-8770.
Easy to Install
To install ADA FibarMat wear mats, just put them down. Each mat is one solid piece and weighs about 60 pounds− no asembly required. ADA FibarMat wear mats are covered by their own 3-year Warranty. Installed on a Fibar System, they ensure that all Fibar System Warranties will apply.
ADA FibarMat Specifications
1. Wear mat shall be manufactured from recycled rubber.
2. Dimensions are minimum 36” by 36” by 1.5” thick.
3. Wear mat must meet Consumer Product Safety Commission Guidelines for a drop-height of 3’ in accordance with ASTM F1292. When installed on top of a Fibar Systems surface of 8” depth or greater, ADA FibarMat must meet ASTM F1292 at a drop height of 12’ (impact attenuation performance tests are available on request.)
4. Wear mat must meet the Americans with Disabilities Act (ADA) regulations.
5. Suppliers must provide product liability insurance.
Lower Maintenance Costs
With ADA FibarMat wear mats, your playground surface needs less maintenance. Over time, a modest, one-time investment will dramatically reduce labor costs.
Installation Instructions
1. An ADA FibarMat must be installed under all swings and at slide exits to preserve your Fibar System Warranty. It should also be used under other heavy-use equipment, including sliding poles.
2. When an ADA FibarMat is installed at the base of a sliding pole, you must cut the mat so that the pole goes through the center. A sharp utility knife can be used for this purpose.
3. We recommend installing the ADA FibarMat flush with the surface of the Fibar® wood fiber . An area 39” x 39” x 2” should be raked out. Make sure the area is as level as possible. Drop in the ADA FibarMat and rake back the Fibar to the edge of the ADA FibarMat.
Get a price quote now! Contact the experts in Playground Safety Surfaces today!
Call us at 800.342.2721 or send us your request